Blog

How much it costs to manufacture clothing

A calculator and US dollar bills on a desk

There is no single answer to what clothing costs to manufacture, because the honest answer is a range that moves by a factor of ten. A basic cotton tee can leave a factory at 3 dollars. A lined wool jacket can leave the same factory at 90. What matters is knowing which parts of that number you control.

What the price is made of

Every factory quote breaks down the same way, whether the factory shows you the breakdown or not.

  • Fabric, usually 45 to 65 percent of the cost
  • Cut, make and trim labor, roughly 20 to 35 percent
  • Trims: labels, zippers, buttons, thread, packaging
  • Sampling and pattern development, often charged separately
  • Factory overhead and profit, typically 8 to 15 percent

On a 4 dollar cotton tee, fabric might be 1.80, labor 1.20, trims 0.35, and the rest covers overhead and margin. On a technical jacket the fabric share climbs and so does labor, because more operations per garment means more minutes on the line.

A worked example

Take a 320 gsm cotton fleece hoodie, 400 pieces, three colors, stock fabric. Fabric consumption runs about 1.1 kilos per piece at 8 dollars per kilo, so 8.80 per unit. Cutting and sewing across ten operations runs 20 to 28 minutes per piece at 0.10 to 0.14 per minute, so roughly 2.60 to 3.90. Trims add 0.80 to 1.50 for a drawcord, eyelets, a woven label, a printed neck label and a polybag.

That puts the factory price around 13 to 15 dollars per hoodie before freight. Retail at 55 to 70 dollars is normal for that cost. Retail at 35 dollars means the brand is working on volume or on hope.

Why small orders cost more per unit

Setup does not scale down. The marker, the pattern, the sample, the first-piece approval and the line balancing cost the same at 100 pieces as at 1,000. Spread over 100 pieces, those minutes are heavy. Spread over 1,000, they nearly vanish.

A 100 piece run of that same hoodie might come in at 18 to 21 dollars instead of 13 to 15. That is not the factory being greedy. It is arithmetic.

The costs that are not on the quote

  • Sampling: 80 to 250 dollars per style, sometimes credited against bulk
  • Freight: 3 to 8 dollars per unit by sea, 12 to 25 by air
  • Import duty: 8 to 32 percent depending on country and fiber
  • Defect allowance: budget 2 to 5 percent of units
  • Payment fees and currency conversion, usually 1 to 3 percent

A brand that budgets only the FOB price and then discovers duty, freight and defects will find itself short by 25 to 40 percent at the end of the first order. Put those lines in the cost sheet from day one.

Where you can actually save

Fabric is the biggest lever, but cutting quality there is a false economy. The savings that hold up are in complexity: fewer colors per style, fewer trims, simpler construction, and a pattern that uses fabric efficiently.

A hoodie with a raglan sleeve and a kangaroo pocket may yield better on narrow fabric than one with set-in sleeves and side seams. A two centimeter change in body length can shift the marker and save three percent of fabric across 2,000 units. Ask your factory to run the marker both ways before you lock the design.

What a fair price looks like

If a quote comes in 30 percent below everyone else, either they misunderstood the spec, or they plan to substitute the fabric, or they are buying the order with a price they will recover later. All three end badly.

Get three quotes on the same tech pack. Compare unit price, fabric spec, lead time and payment terms together, not price alone. The middle quote is usually the right one.

Clothing costs what it costs because of meters of fabric, minutes of labor and the fixed cost of setting up a line. Once you can see a garment as those three numbers, negotiating stops being about pressure and starts being about choices.

Ready to start your brand?

Tell us what you want to make and we'll tell you honestly whether it's worth it.

Contact Us