Blog

How to choose the right fabric for your clothing line

Rolls of colorful fabric in a textile store

Fabric is where most of a garment's cost and nearly all of its feel comes from. Get it wrong and no amount of good sewing saves the product. Get it right and a plain t-shirt feels like something worth forty dollars.

Start with the job the garment has to do

Write down what the garment needs before you look at a single swatch. It might need to hold shape after twenty washes, stretch in four directions, breathe at thirty degrees, or drape softly against the body. The requirements narrow the field faster than any catalog will.

A 400 gsm cotton fleece makes a structured hoodie that stands up on its own. The same design in 280 gsm jersey hangs flat and looks cheap. Neither fabric is better. They do different jobs, and the job comes first.

Knit or woven, and what weight tells you

Knits stretch because the yarn loops. Wovens do not, because the yarns cross over each other. That single fact decides most of your construction choices, your seam types and your fit tolerances.

T-shirts, hoodies and leggings are knits. Denim, shirting and most outerwear are wovens. If you want stretch in a woven, you add elastane, usually 1 to 3 percent, and you accept that the garment recovers less well over time than a knit does.

Grams per square meter tells you weight. It does not tell you hand feel, shrinkage, pilling or drape. Two 180 gsm cotton jerseys can feel completely different depending on yarn count, knit structure and finish.

Use GSM to compare within a category and nothing more. A 180 gsm single jersey and a 180 gsm interlock are not interchangeable, and a buyer who specifies only weight will get surprises at the sample stage.

Order swatches, then abuse them

  • Wash the swatch three times at the temperature your customer will use
  • Measure before and after to see real shrinkage, not the lab number
  • Rub it against itself to check pilling
  • Stretch it and release, twice, to see recovery
  • Hold it up to light to check for transparency
  • Sew a small seam and press it to see how it behaves under an iron

A swatch costs a few dollars and takes a week to arrive. A wrong fabric decision costs a full production run.

Mill minimums and stock fabric

Custom dyed fabric usually starts at 300 to 500 meters per color. Some mills will go lower for a premium and some will not go lower at all. If your first order is 200 pieces, you will be buying stock fabric, which means choosing from what already exists.

Stock lists change weekly. Ask for the current list with weights, compositions and available quantities, and confirm the roll count before you commit to a design. A color that exists today may be gone in six weeks.

Colorful fabric rolls on display

Price is not the whole comparison

A fabric at 4 dollars per meter that shrinks 8 percent will cost you more than one at 5 dollars that shrinks 2 percent. Shrinkage means bigger cut allowances, more wasted meters, and garments that stop fitting after a month.

Ask for the shrinkage test result before you negotiate price. Then ask for the yield, meaning how many garments come out of one meter at your marker. The cheapest fabric per meter is often not the cheapest fabric per garment.

Where people get burned

  • Buying on a photo, because screens lie about color and texture
  • Approving a lab dip without seeing it under daylight
  • Assuming two suppliers mean the same thing by 100 percent cotton
  • Skipping the shrinkage test because the mill said it was pre-shrunk

Fabric choice is a series of small, boring checks that prevent large, expensive mistakes. None of it is difficult. It just has to happen before the order is placed, not after the first bulk delivery arrives.

Ready to start your brand?

Tell us what you want to make and we'll tell you honestly whether it's worth it.

Contact Us